Collinstown, Leixlip, Co. Kildare
Proposed development
To demolish existing generator steel fencing surround with provision for new masonry shed to house generator, demolish existing temporary prefabricated structures with provision for new metal clad industrial storage building, demolish existing dugout, demolish existing temporary prefabricated structure called ‘meeting room’ with provision for new 183sqm two storey clubhouse to include an outdoor terrace, new disabled access route, new roof mounted solar panels, new bicycle rack area, new soakaway pit, no proposed works to existing clubhouse which will remain in use as changing facilities, new connections into existing drainage and services and all associated site works
This description looks cut short in the national planning register. Read the full description on the council's file
- Applicant
- Not published
- Authority
- Kildare County Council
- Decision due
- Not available
Timeline
Application received
14 Mar 2025
Decision due
Not available
Site location with nearby applications
Can't object to this one
The council has marked this application invalid or closed.
See applications open for objections →Keep an eye on this area
We'll email you when new applications are lodged nearby.
Planning history within 750 m
for the proposed development consists of the construction of link structures with associated plant and equipment, for the conveyance of materials, between existing FAB 10, FAB 14 and FAB 24 manufacturing facilities, as described herein: (1) An elevated link structure located between FAB 10 and Fab 14 manufacturing facilities, sized approximately 350 square metres and approximately 10.5 metres high and located approximately 7 metres above ground, housing plant and equipment, together with roof mounted plant and equipment. (2) An elevated link structure located between FAB 14 and FAB 24 manufacturing facilities, sized approximately 550 square metres and approximately 10.5 metres high and located approximately 7 metres above ground, housing plant and equipment, together with roof mounted plant and equipment. (3) Minor modifications to existing FAB 10, FAB 14 and FAB 24 manufacturing facilities arising from the proposed link structures, including items of plant and roof mounted equipment. This application consists of a variation to a previously permitted development for an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended by the Protection of the Environment Act, 2003) is required. This is a site to which the Chemicals Act (Control of Major Accident Hazards Involving Dangerous Substances) Regulations 2015 (S.I. 209 of 2015) applies.
the construction of link structures with associated plant and equipment, for the conveyance of materials, between existing FAB 10, FAB 14 and FAB 24 manufacturing facilities, as described herein: (1) An elevated link structure located between FAB 10 and FAB 14 manufacturing facilities, sized approximately 350 square metres and approximately 10.5 metres high and located approximately 7 metres above ground, housing plant and equipment, together with roof mounted plant and equipment. (2) An elevated link structure located between FAB 14 and FAB 24 manufacturing facilities, sized approximately 550 square metres and approximately 10.5 metres high and located approximately 7 metres above ground, housing plant and equipment, together with roof mounted plant and equipment. (3) Minor modifications to existing FAB 10, FAB 14 and FAB 24 manufacturing facilities arising from the proposed link structures, including items of plant and roof mounted equipment. This application consists of a variation to a previously permitted development for an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended by the Protection of the Environment Act, 2003) is required. This is a site to which the Chemicals Act (Control of Major Accident Hazards Involving Dangerous Substances) Regulations 2015 (S.I. 209 of 2015) applies
upgrades to the existing overbridge that will be within the curtilage of 2 no. Protected Structures (RPS Reference Nos.: B11-125 and B11-127). The works will include the removal of the existing staircases and the provision of new staircases on both platforms, the provision of a lift shaft on Platform 1 adjacent to the new staircase, relocation of existing passenger shelter on Platform 2, temporary use of the car park for a construction compound to be reinstated following construction, and all ancillary works to facilitate the Proposed Development. A Natura Impact Statement (NIS) has been prepared and will be submitted to the planning authority with the application
for upgrades to the existing overbridge that will be within the curtilage of 2 no. Protected Structures (RPS Reference Nos.: B11-125 and B11-127). The works will include the removal of the existing staircases and the provision of new staircases on both platforms, the provision of a lift shaft on Platform 1 adjacent to the new staircase, relocation of existing passenger shelter on Platform 2, temporary use of the car park for a construction compound to be reinstated following construction, and all ancillary works
the development will consist of the construction of a new single-storey porch to the front of the house; construction of a first floor extension above the existing single storey living area at the side of the house, including a high-level opaque window to the side facade; alterations to the existing hip roof to create an extended ridgeline with a gable roof to the side to accommodate attic stairs, allowing for the conversion of the attic into non-habitable storage space with a dormer to the rear roof; alterations to one of the existing rear facade window; the installation of two rooflights to the main roof to the front of the house and all associated ancillary site works.
the construction of a new single-storey porch to the front of the house; construction of a first floor extension above the existing single storey living area at the side of the house, including a high-level opaque window to the side facade; alterations to the existing hip roof to create an extended ridgeline with a gable roof to the side to accommodate attic stairs, allowing for the conversion of the attic into non-habitable storage space with a dormer to the rear roof; alterations to one of the existing rear facade window; the installation of two rooflights to the main roof to the front of the house; and all associated ancillary site works.