Leixlip Amenities Centre, Collinstown Industrial Park, Leixlip

single storey extension at rear, brickwork facades to South and West walls of house planning ref 1505/80, Brickwork gateway 1.8m high at side of house, blockwork screen wall 2.3m high at side of house, detached garage at rear of house

for the proposed development consists of the construction of link structures with associated plant and equipment, for the conveyance of materials, between existing FAB 10, FAB 14 and FAB 24 manufacturing facilities, as described herein: (1) An elevated link structure located between FAB 10 and Fab 14 manufacturing facilities, sized approximately 350 square metres and approximately 10.5 metres high and located approximately 7 metres above ground, housing plant and equipment, together with roof mounted plant and equipment. (2) An elevated link structure located between FAB 14 and FAB 24 manufacturing facilities, sized approximately 550 square metres and approximately 10.5 metres high and located approximately 7 metres above ground, housing plant and equipment, together with roof mounted plant and equipment. (3) Minor modifications to existing FAB 10, FAB 14 and FAB 24 manufacturing facilities arising from the proposed link structures, including items of plant and roof mounted equipment. This application consists of a variation to a previously permitted development for an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended by the Protection of the Environment Act, 2003) is required. This is a site to which the Chemicals Act (Control of Major Accident Hazards Involving Dangerous Substances) Regulations 2015 (S.I. 209 of 2015) applies.

the construction of link structures with associated plant and equipment, for the conveyance of materials, between existing FAB 10, FAB 14 and FAB 24 manufacturing facilities, as described herein: (1) An elevated link structure located between FAB 10 and FAB 14 manufacturing facilities, sized approximately 350 square metres and approximately 10.5 metres high and located approximately 7 metres above ground, housing plant and equipment, together with roof mounted plant and equipment. (2) An elevated link structure located between FAB 14 and FAB 24 manufacturing facilities, sized approximately 550 square metres and approximately 10.5 metres high and located approximately 7 metres above ground, housing plant and equipment, together with roof mounted plant and equipment. (3) Minor modifications to existing FAB 10, FAB 14 and FAB 24 manufacturing facilities arising from the proposed link structures, including items of plant and roof mounted equipment. This application consists of a variation to a previously permitted development for an activity for which a licence under Part IV of the Environmental Protection Agency Act 1992 (as amended by the Protection of the Environment Act, 2003) is required. This is a site to which the Chemicals Act (Control of Major Accident Hazards Involving Dangerous Substances) Regulations 2015 (S.I. 209 of 2015) applies

upgrades to the existing overbridge that will be within the curtilage of 2 no. Protected Structures (RPS Reference Nos.: B11-125 and B11-127). The works will include the removal of the existing staircases and the provision of new staircases on both platforms, the provision of a lift shaft on Platform 1 adjacent to the new staircase, relocation of existing passenger shelter on Platform 2, temporary use of the car park for a construction compound to be reinstated following construction, and all ancillary works to facilitate the Proposed Development. A Natura Impact Statement (NIS) has been prepared and will be submitted to the planning authority with the application

for upgrades to the existing overbridge that will be within the curtilage of 2 no. Protected Structures (RPS Reference Nos.: B11-125 and B11-127). The works will include the removal of the existing staircases and the provision of new staircases on both platforms, the provision of a lift shaft on Platform 1 adjacent to the new staircase, relocation of existing passenger shelter on Platform 2, temporary use of the car park for a construction compound to be reinstated following construction, and all ancillary works

The development will consist of; 1) Demolish existing rear extension, 2) Widen existing entrance, 3) New windows opes and skylights on the existing house, 4) New rear single storey extension to accommodate more living space; kitchen, dining, lounge, WC, bathroom, 5) New extension to include roof lights, 6) New separate domestic garage with skylights to the rear of the property, 7) All alterations, internal modifications and all associated site development and landscaping works.