Johnson & Johnson Innovative Medicine, Barnahely, Ringaskiddy, Co. Cork, P43 FA46

The proposed development will consist of: 1. Permission for temporary retention for a period of 5 years for the use of 2 No. existing single-storey modular office buildings (Buildings Nos. 8 and 9), each having a floor area of approximately 41.8 sqm (providing a combined total floor area of approximately 83.6 sqm), and a maximum height of approximately 2.76 metres, located in the south-eastern part of the campus. 2. Permission for temporary retention for a period of 5 years for the use of 2 No. existing single-storey modular office/workshop buildings (Buildings Nos. 13 and 14), with a floor area of approximately 40.17 sqm and 41.89 sqm respectively (providing a combined total floor area of approximately 82.06 sqm), and a maximum height of approximately 2.76 metres, located in the northern part of the campus. 3. Permission for retention of adjustments and for permanent permission of the approved the modular production support building (former Gowning Room) previously granted temporary permission under Reg. Refs. 21/5786 & 24/5501. The proposed building will have a gross floor area total of approximately 283 sqm and maximum height of approximately 3.76 metres. Adjustments to the approved building include an increase of floor space by approximately 7.0 sqm, installation of ancillary external air handling units, and minor adjustment of the building’s position and the connecting corridor to Production Building P02. This application relates to development, which comprises an activity which holds an Industrial Emissions Directive Licence (Reg. No. P0778-03).

Planning permission for the construction of a single storey Electrical Room extension over service void on the roof of the existing Blower House Building including external access stairs and ladders and ancillary site works including the demolition of site plant at their production facility at Ballintaggart Townland, Ringaskiddy, Co. Cork. The proposed development is covered by an existing Industrial Emissions Directive Licence No. P0013-06. As the development refers to a modification to an establishment to which the Major Accident Directive applies, information as specified in the Third Schedule of the Major Accident Regulations will be submitted with the application.

Planning permission for the following: (i) Change of use of 5no. existing permitted storage tanks on site from the storage of molasses to the storage and distribution of HVO (Hydrogenated Vegetable Oil) fuel, (ii) raising of bund wall by 250mm, (iii) removal of existing former switch room building, (iv) new soft landscaping to replace existing graveled areas, which facilitates the removal and relocation of underground storm sewer infrastructure including 10,000 litre class 1 interceptor and associated steel cabinet from this area, (v) new foul treatment system and, (vi) all other associated site development and drainage works. The development to be retained consists of (i) existing alterations to tank farm bund structures, (ii) 2no. existing bottom loading skid areas and gantry structures for the offloading of fuel, (iii) existing group of generators, battery storage, and other plant structures, (iv) Construction of existing 2no storey facility building (GFA c53.5sqm) and bollards, (v) Existing c2.5m palisade mesh, post fencing and entrance gates (vi) & all associated existing site development, ground finishes, and drainage works.

1) Permission for retention of the following, a) modifications to the elevations, b) additional production floor area of i) 32 square metres at ground floor level, ii) 22.1 square metres at ground floor mezzanine level, iii) 48.1 square metres at first floor level, iv) 48.1 square metres at second floor level, v) 48.1 square metres at second floor mezzanine level and vi) 48.1 square metres at third floor level. This retention permission relates to the previously permitted New Product Technology Laboratory Extension, Planning ref. 22/5541. 2) Permission for retention of a 3 storey production extension at ground floor level with a second floor mezzanine to the north East of the previously permitted New Product Technology Laboratory Extension, Planning ref. 22/5541. The Extension to be retained has a total floor area of 84 square metres. The development is covered by an existing Industrial Emissions Directive Licence no. P0013. As the development refers to a modification to an establishment to which the major accident directive applies, information as specified in the third schedule of the major accident regulations will be submitted with the application.

Permission for 1) change of use of 5 no. existing permitted storage tanks on site from the storage of molasses to the storage and distribution of HVO (Hydrogenated Vegetable Oil) fuel, 2) raising of bund wall by 250mm, 3) a new foul treatment system and 4) all other associated site development and drainage works. The development to be retained consists of 1) alterations to tank farm bund structures, 2) 2 no. bottom loading skid areas and gantry structures for the off-loading of fuel, 3) group of generators, battery storage and other plant structures, 4) construction of 2-storey facility building (GFA 53.4sqm) 5) and all assocaited site development and drainage works.

Permission for an upgrade and extension to the existing biomedicines manufacturing facility, including: 1) construction of a part single-storey and part two-storey extension to the northern elevation of the existing production building P01 with total floorspace of c. 1,718 sqm and a maximum height of c23.01m, 2) construction of a new medium voltage and low voltage (MV &LV) electrical sub-station with 2 no. single storey over service void building units with total floorspace of c.346sqm and maximum height c.6.33m, and to include a back-up generator, 3) construction of an extension to the existing central utility plant (CUP) to accommodate new boiler, heat pumps and plant rooms with total floorspace of c.482sqm and maximum height to parapet, c.14.2m and to include demolition of an existing boiler house of 68.6sqm, 4) works to upgrade and expand the existing on-site Waste Water Treatment plant (WWTP) incorporating new plant and equipment for increased hydraulic and biological treatment capacity; including a new single storey electrical substation with total floorspace of c.233sqm and maximum height c.5.29m, back-up generator, cooling towers, and odour control unit, 5) all associated site development, landscaping and ancillary works including re-profiling of the earthen berms in the vicinity of the WWTP and associated demolition works, boundary fencing, underground services, high-level pipe and cable racks, internal site roads, yards and temporary construction compounds. This application relates to development, which comprises an activity, which holds an Industrial Emissions Directive Licence (reg. no. P0778-02). An Environmental Impact Assessment Report (EIAR) and Natura Impact Statement (NIS) has been prepared in respect of the development.